Mohammad Mazloum-Ardakani; Hamed Arabi; Zahra Alizadeh; Mahnoosh Haghshenas; Fatemeh Farbod; Sahar Saadat HosseiniKhah; Bibifatemeh Mirjalili
Abstract
In this research, a novel modified glassy carbon electrode (GCE) was successfully fabricated with a tri-component nanocomposite consisting of 5-(3,4-dihydroxyphenyl)8,8-dimethyl-2-(methyl thio)-7,8,9,10-tetrahydropyrimido [4,5-b]quinolone-4,6(3H,5H)-dione (PQ23) and Nitrogen-doped reduced graphene oxide ...
Read More
In this research, a novel modified glassy carbon electrode (GCE) was successfully fabricated with a tri-component nanocomposite consisting of 5-(3,4-dihydroxyphenyl)8,8-dimethyl-2-(methyl thio)-7,8,9,10-tetrahydropyrimido [4,5-b]quinolone-4,6(3H,5H)-dione (PQ23) and Nitrogen-doped reduced graphene oxide aerogel/molybdenum oxide nanorods (PQ23/N-doped-rGO/MoO2 /GCE) as sensing platform toward hydrazine (HDZ). The nanocomposite is characterized by MAP analysis, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). Through electrochemical investigations, the electron transfer coefficient between PQ23 and the N-doped-rGO/MoO2 /GCE (glassy carbon electrode which was modified with reduce graphene oxide decorated by molybdenum oxide nanorods) and the apparent charge transfer rate constant, ks, and diffusion coefficient (D) were calculated. Electrochemical behavior and electrocatalytic activity of the nanocomposite modified GCE were studied by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV). Under the optimum experimental condition, the designed sensor exhibited high sensitivity and suitable selectivity for hydrazine oxidation, enabling the detection of hydrazine with a linear range of 25.0-1000.0 µM and a good detection limit (3σ) was 4.2 µM. The designed electrochemical sensor shows good repeatability, reproducibility, and acceptable stability with an RSD less than 3.2%.
Mohammad Mazloum-Ardakani; Zahra Alizadeh; Laleh Hosseinzadeh; Bibifatemeh Mirjalili; Naeimeh Salehi
Abstract
In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) with6-amino-4-(3,4-dihydroxyphenyl)-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5 carbonitrile (pyrazole derivative (APC)) as sensing ...
Read More
In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) In this work, we synthesis and application of functionalized carbon nanotubes (CNTs) with6-amino-4-(3,4-dihydroxyphenyl)-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5 carbonitrile (pyrazole derivative (APC)) as sensing platform toward hydrazine (HZ). Electrochemical properties of functionalized carbon nanotubes composite (APC-CNT) were investigated by cyclic voltammetry, chronoamperometry and differential pulse voltammetry techniques. It was found that the APC-CNT composite exhibited a pair of redox peaks, which is due to the electron transfer between the APC and the glassy carbon electrode. The electrocatalytic properties of the APC-CNT composite for HZ oxidation was remarkably increased as compared to only CNTs. The kinetic parameters of the APC-CNT composite in the presence and absence of HZ was studied by electrochemical methods. The APC-CNT modified electrode revealed an excellent voltammetric response to oxidation of HZ with a wide linear range from 0.01 μM to 120.0 µM and limit of detection of 8.6 nM. Also, APC-CNT modified electrode shows high selectivity, good stability, reproducibility with a RSD less than 2.11%.